Let's start with designating a secure playground area, which should be big enough not just to fit all the equipment, but and to comprise the impact area, which will be where a child can fall. Remember that the impact area is usually to be free of obstacles. In order to be able to calculate this area, we must know the critical fall height of the equipment. As an example, if the utmost height that a kid can fall is 2 m, the bottom needs to be covered with protective playground flooring certified to attenuate the impact from 2 metres. Moreover, the flooring should reach 1.8 m behind the edge of the equipment in question. The formula to calculate the impact area is: 2/3*critical fall height + 50cm.
This means that you ought to always pave the playground with safety flooring reaching 1.5 to 2.5 metres behind the equipment.
Another important safety requirement is that the utmost fall height is 3 metres. So, make certain none of the equipment where a child can stand or climb is higher than 3 m. Finally, let's not just forget about common sense which should guide you in the initial place when building an exclusive playground.
Preparing the subfloor
After you have looked at the location of the existing equipment or installed the newest one (following the manufacturer's instruction) and once you have designed the sum total playground area, it is time and energy to prepare the subfloor. If you build a DIY playground it is much simpler if the subfloor is bound (e.g. concrete, paving stone, asphalt, tiles). For the reason that case, you are able to lay safety flooring directly along with it, without the necessity to get ready the bottom course. If you choose rubber playground mats which are interlocking, you will not even need certainly to glue the tiles.
If your subfloor is unbound, like it is soil, sand or grass, you need to get ready it first to create it load-bearing and solid. The best and most economical way is to get ready a grit or gravel bedding. Level the present area and place a coating around 안전놀이터 15 cm of sharp-edged gravel, which should be compacted and levelled. You will pave the safety playground mats directly onto the gravel bedding. Rain water will seep through the porous mats and through the gravel layer to the ground. This solution is ecological and very practical - you will have no puddles and children can use the playground in virtually any weather!
Low-maintenance playground flooring
Rubber mats are probably the most practical flooring solution for a secure DIY playground. Apart from the truth that they are childishly easy to set up, they might require practically no maintenance. Playground mats are manufactured from a permanently elastic material (polyurethane-bonded rubber granulate) meaning they are absolutely weatherproof. They will not rot or crack, and they will work for about 15 years or more. If you have any issue, individual mats can be lifted or exchanged.
Other playground materials are either very costly or difficult to maintain. Especially sand, grass or wood chips need constant maintenance, exchange and replenishment. The expenses linked to this can be overwhelming for a community or neighbourhood. Especially that the layer of these loose fill materials needs to be quite thick to offer the mandatory fall protection.
With rubber playground mats it is super easy to offer the fall protection necessary on a certain playground. The manufacturer always informs you what the critical fall height for every safety mat is, and which is suited to installations on unbound subfloor. Rubber granulate mats are simple to cut on site and they've small formats to create DIY work slightly easier.
0 Comments